LED Strip Lighting Buyer’s Guide: Everything you need to know about LED Strip Lights

Do you wanna light up your space with a reflective ambiance? Do you wanna give your space an expensive feel? Then, you’ve tapped in the right direction! LED strip lighting is available in several forms, colors, and shapes in the market. They are available for your bedrooms, living rooms, kitchen, office, and even for those of you who run your own restaurants, pubs, or clubs. They are sure to turn heads and allure more public to your businesses. They come with a long LED strip with a remote that you can use to dim your lights or switch them off or on. These lights also come with tapes that have an option of different colors and lastly, they come with an adapter so that installation is made easier for you.

Which products utilize LED Strip lights?

Do you fancy LED Strip lights but are not really aware of its characteristics, well don’t worry, we’ve done the homework for you so just stay with us, we’ll walk you through it. LED Strip lights are available in the market with different brands, each of them having their own unique characteristics. One of the best options is Lepro LED strip lights for home, for office, or for your business as well. They’ve got huge varieties such as LED bulbs, LED recessed lights, LED solar flood lights, LED wall pack lights, and many more.

Let us now guide you on how these lights work, then you may choose the best fit accordingly.

Uses of LED Strip Lights

These lights come with long strips that are enough to light your entire room, living room, and kitchen. They are perfect for annual events like Halloween, decorating your Christmas trees, and more. LED Strip lights are supplied in a range of colors so you can choose any shade you wish for according to your setting. They are also supplied with long sticky tapes along with a simple manual with instructions on how to install them yourself! For the best collection for LED strip lights, visit: https://www.lepro.com/

Trouble Shooting: LED Strip Lights

These lights are usually the go-to lights to add a bit of pizazz to your corners and angled architecture. They come in easy, DIY installation kits. But still, they have their issues when most of you try to install them yourselves. Below is a troubleshooting list that may solve your queries linked to LED Strip lights:

The light turns on and off

When this happens, it may be because of a loose dimmer connection or you may have used the wrong dimmer. Solution: check the connection and dimmer spec’s sheet for compatibility.

LED Strip light just won’s light up

This may be simply because your strip light is not plugged into the wall or simply not turned on, or maybe the battery is dying or the connection is loose. Solution: replace the old battery with new ones and check if the connection is tight and not loose.

Hardwire does not light up

This is possible because of loose wiring or too much insulation. Solution: check insulation and make sure it is stripped about half an inch on either end and ensure a tight connection.

LED flickers

This may occur when the voltage is low from the power supply or if your batteries are dying. Solution: replace batteries (obviously) and make sure that the voltage of lights and drivers are the same and compatible.

Won’t flash

This occurs when lights are connected to dimmers (a dimmer does not allow lights to flash). Solution: disconnect the dimmer.

Light intensity is different on both ends

When the light intensity is low at the end of the strip, it means that there is a voltage drop. Solution: do not run a single strip on a single LED driver. Incorporate more than one driver on several strips of light.

Light is a different shade at the end

This is a hardware problem and arises when the wires cross one another. Solution: split your lights and run on several drivers. Ensure no more than 16 feet per driver is installed.

The Strip RBG light stays one color

This is a simple problem that arises because of human error. Yes, human error! This occurs if you have connected wires backward (reversed polarity). Solution: just flip the light and reconnect it.

Too hot to hold

This occurs when the voltage is high. Solution: Ensure that the voltage of lights and drivers are same and compatible.